Mon-Sat: 9am - 6pm
Whether you're ordering heavy-duty structural piping parts, custom exhaust sections, or high-pressure fluid lines, you must rely on the expertise of trusted metallurgy experts. Industrial projects are channeled into material networks to obtain components with absolute dimensional accuracy, traceable heat tracking, and outstanding structural stability.
Sidhgiri Overseas is one of the Stainless Steel 202 Pipe Suppliers in Jordan who offer high-quality grade 202 piping solutions specifically designed for cost-effective structural and general engineering applications. This particular austenitic chromium-manganese-nickel alloy is very tough, moderately weldable, and will provide good corrosion resistance in mild environments.
The dimensional accuracy and quality control in our manufacturing reach every detail, which is why our 202 stainless steel pipes are ideal for structural frameworks, automotive parts, and interior plumbing systems in commercial areas in Jordan. and neighboring {local_hubs} cities such as Jordan.
Sidhgiri Overseas, a world-class market leader, is a manufacturer of fully traceable stainless steel automotive 201, 202, industrial, decorative, and performance piping certified by the mill. Sidhgiri Overseas has stringent control over their distribution network and provides highly customized configurations for the most rigorous industrial & thermal environments.
Stainless steel 202 pipes are low-nickel, high-manganese austenitic stainless steel pipes that are suitable for low-moisture and indoor applications. They are a very cost-effective alternative to costly alloys like SS 304. A significant portion of the expensive nickel is removed from the pipe and replaced with optimized quantities of manganese and nitrogen, which means the pipe has a similar tensile strength, high-end look, and structural hardness as a standard stainless profile but at a much lower price. They are especially valuable for interior decoration, modular furniture frames, and making architectural components.
The most distinctive characteristic of stainless steel is the special chemical composition that includes at least 10.5% chromium. The chromium is chemically compatible with the oxygen in the atmosphere and forms the non-porous layer of chromium oxide, which is extremely thin at the surface of the metal.
Oxidation Barrier: This thin barrier resists oxidation of the base iron matrix from ambient moisture and the mild corrosive agents.
Self-Healing Capabilities: This protective film will regenerate after the 202 pipe has been cut, scraped, or significant friction occurs during installation, ensuring the tube structure is always protected and maintains the characteristic clean metallic finish.
Since its invention over a century ago, stainless steel has become the world's most popular and widely used material. It contains chromium, which gives it an environmentally oxidation-resistant structure. Grade 202 offers an aggressive chloride solution resistance equal to those of the standard grades, but with a more "low-maintenance" profile and a familiar high-end luster, it is the ideal material for cost-conscious structural designs.
It's 202 stainless steel pipe and is available in various product types, including welded square, rectangular, and round. The compatibility of the alloy chemistry and the manufacturing quality of the piping with the environmental conditions and structural load will be the only factors in determining the piping structure.
The cold-forming technique is used in combination with the continuous longitudinal seam welding process for manufacturing SS 202. The nickel to manganese ratio used in the material has been specifically designed to withstand high mechanical stresses while consuming low amounts of raw resources. Main advantages are:
Exemplary Affordability: Much more affordable than high-dollar SS 304 or SS 316 lines, leaving large margins of budget savings in high-volume commercial real estate and product manufacturing applications.
High Structural Strength: Targeted N additions are the structural interstitial hardener, which gives excellent tensile strength and high structural toughness (even in cold environments).
Brilliant Surface Polish: Brushed, satin or grit 600+ mirror finish is easily applied and allows for the creation of an aesthetic that appears as if it were much higher quality than the alloys that are far more expensive.
Optimal Geometrical Variety: Easily cold-formed in stable square, rectangular, and round cross-sections to meet various dimensional stability requirements for different applications in architecture and structure.
The final mechanical properties and uses of the product are enormously affected by the chemical composition of the steel. One of the most important parameters of the material is the performance boundaries, scratch resistance, and the thermal properties of a mechanical tube:
SS 202 (Standard Austenitic): Contains 17–19% chromium, 4–6% nickel, and 7.5–10% manganese. The intentional addition of up to 0.25% nitrogen is a structural interstitial hardener that preserves the surface profile from minor abrasions and dents.
SS 201 (Companion Grade): A slightly lower Ni grade that has been developed for heavily cold-worked structural sections where forming agility is more important than resistance to localized moisture in the atmosphere.
DIN 1.4373 | EN X2CrMnNiN17-7-5: ASTM A554 Grade MT202 (Welded mechanical tubing) specification designed for architectural, structural, and ornamental applications.
DIN 1.4372 | EN X12CrMnNiN17-7-5: Equivalents to ASTM A554 Grade MT201 (Lower nickel equivalent used for structural framing and commercial fabrication).
Improving quality is always linked with improving industrial standards. The various organization standards vary over a broad range of application areas and need to be aligned precisely. The industrial specifications required under their local code compliance must be confirmed by the buyer before purchasing.
The channel's structure is determined by the following dimensional outer diameters (OD) for round tubes, widths by heights for square/rectangular lines, and wall gauge thicknesses. The ASTM standards set very high quality criteria:
ASTM A554: Standard specification for welded stainless steel mechanical tubing for ornamental, structural, architectural, and furniture applications where appearance, close tolerances, and dimensional accuracy are of critical importance.
Architectural Trim & Interior Railings: Handrails, balcony balustrades, footrests, and shopping mall guardrails utilize polished or satin-finished round lines to provide maximum durability against constant human contact in indoor public spaces.
Modern Modular Furniture Framing: Table legs, wardrobe racks, luxury retail display shelves, and interior store fixtures make heavy use of square and rectangular profiles due to their sharp 90-degree edges, flat mounting faces, and structural rigidity.
Decorative Grills & Window Planks: Thin-gauge round and square lines welded into highly secure, aesthetically clean window frames, building entry enclosures, and protective indoor gates.
When buying structural piping or decorative channels, you need to consider the various prices, certifications for operations, and physical location to the nearest commercial areas of the region:
Tiered Cost Structures: Depending on the total quantity of nickel in the iron, the overall thickness of the wall and the special finishes applied (Below ₹200, ₹201 - ₹250, ₹251 - ₹400, Heavy industrial/performance options). Above ₹401, piping configurations are considered.
Corporate Compliance Filters: This is for major state-run projects, heavy mechanical projects, and large commercial projects, where partnerships are reserved for top-class organizations with an annual turnover of ₹5 Cr+ and regular GST registration for 3+ years, to ensure, as per the set standards, material traceability.
Localized Logistics Networks: Project managers can benefit from agile delivery options through the use of specialized regional supplier networks in Jordan, reducing transport delays to local construction projects in the region and neighboring commercial centers (local_hubs).
Specific export channels are required to provide cross-border industrial logistics for supplying manufacturing plants, structural distribution chains, and commercial assembly centers around the world. We are the best Stainless Steel 202 Pipe Exporters in Jordan.
Sidhgiri Overseas Global Distribution:Your local production lines reach directly to our global logistics network here in Jordan with high-quality stainless steel pipelines sourced from our facility and delivered to processing hubs and automotive distribution centers around the globe— Each shipment adheres to international standards EN, DIN, and ASTM, delivering the world's best quality structural coverage to global manufacturing networks as well as regional {local_hubs} markets.
SS 202's chemistry is defined by its chromium-manganese-nickel-nitrogen balance:
|
Chromium (Cr) |
17% – 19% |
|
Nickel (Ni) |
4% – 6% |
|
Manganese (Mn) |
7.5% – 10% |
|
Nitrogen (N) |
Up to 0.25% max |
The manganese and nitrogen content is what allows SS 202 to use less nickel than SS 304 without giving up the austenitic structure — nitrogen in particular adds structural hardness that helps offset the lower nickel level.
Standard cross-reference for SS 202 pipe:
|
DIN |
1.4373 |
|
EN |
X2CrMnNiN17-7-5 |
|
ASTM |
A554 Grade MT202 (welded mechanical tubing) |
SS 202's companion grade, SS 201, is covered under DIN 1.4372 / EN X12CrMnNiN17-7-5 / ASTM A554 Grade MT201, with a slightly lower nickel content and higher cold-workability — sometimes the preferred choice for structural sections that require heavy cold-forming.
SS 202 pipe is supplied by Siddhgiri Overseas in three profile shapes to match different fabrication and structural needs:
Wall thickness across all three profiles ranges from 0.5mm to 3.0mm, allowing selection based on load requirements and fabrication method — thinner gauges for lightweight framing and trim, heavier gauges where the pipe carries structural load.
Three surface finishes are available:
All dimensions are checked before dispatch to confirm they fall within the ordered tolerance.
SS 202 pipe is built for dry, indoor use, and it performs well in that setting:
In these settings, SS 202 gives fabricators strength, hardness, and surface appearance close to what SS 304 offers, at a lower material cost — which is why it's a common choice for budget-conscious interior fabrication and furniture work where corrosion exposure is minimal.
Where SS 202 is not the right choice: outdoor installations, marine or coastal environments, and any high-moisture or high-humidity setting. The lower nickel content in SS 202, compared to SS 304, means meaningfully reduced corrosion resistance — it will not hold up outdoors or in humid coastal air the way SS 304 or SS 316 will. For exterior railings, marine fittings, or any application exposed to weather or salt air, SS 304 or SS 316 pipe is the appropriate choice, not SS 202.
Siddhgiri Overseas is ISO certified for quality, occupational health & safety and environment management, and holds the import and export certification required to supply stainless steel pipe and tube to customers worldwide. Certificate copies are available on request for buyers who need them for their own compliance records.
On your main supply partner, you can rely on Sidhgiri Overseas for your long-term operational defense, regardless of the scale of architectural trim manufacturing, modern commercial furniture manufacturing, or interior structural framing production. We operate with a high standard of quality in our output sectors:
Complete Material Traceability: Each bundle sent from Sidhgiri Overseas is accompanied by accurate, complete material test certificates that provide accurate chemical compositions right down to the melt stage.
Strict Dimensional Accuracy: Advanced rolling, welding, and calibration equipment guarantee strict dimensional accuracy of the product throughout all nominal pipe sizes (NPS), wall thickness, and diameter ranges.
Welded Material Lines – Excellent Wall Consistency: All material lines in the welded material have the same precise tolerances as high-grade flat-rolled sheet, ensuring walls along the entire tube run are consistent and will not be distorted.
Custom-Formed Bend Parts for True Mandrel-Bent Profiling: Uniform inner diameter on all structural twists for maximum structural integrity and preventing restriction-born stress concentration.
Premium Quality Engineering: Equipped with modern quality control facilities, we provide a perfect aesthetic appearance, high surface hardness, and uniformity of straightness for each production run.
Flexible Sourcing Configurations: Inventorying a large range of sizes from small, decorative profiles all the way to medium structural columns in grades 202 and 201 steel.
Vetted Commercial Integrity: Sidhgiri Overseas is built with significant manufacturing quantities, tiered billing structures, and verified compliance frameworks to effortlessly deal with large enterprise contracts.
Looking for one of a class of 202 piping infrastructure and special structural profiles in your next operation? Your exact mechanical requirements are exactly what our technical distribution team at Sidhgiri Overseas will be looking for to match with the optimum alloy grade, surface finish and wall thickness solution. Contact our supply team and get a detailed multi-line quotation, certified mill reports and/or direct shipping confirmation for your bulk commercial orders. Optimise your operations with precision-engineered Sidhgiri Overseas metallurgy technologies.
**Q: What is a stainless steel 202 pipe, and how does it differ from Grade 304?**
**A:** Grade 202 is an austenitic chromium-manganese-nickel alloy. Unlike traditional Grade 304 (which relies heavily on high nickel content), Grade 202 replaces a significant portion of nickel with optimised quantities of manganese and nitrogen. This chemical optimisation yields a material with similar tensile strength, high-end visual appeal, and structural hardness to 304, but at a far more economical price point.
**Q: Where should Grade 202 pipes be deployed, and where should they be avoided?**
* **Ideal Applications:** Excellent for indoor architecture, dry commercial structures, modular furniture frames, retail display racks, and interior public handrails.
* **Avoided Applications:** Because of its reduced nickel content, it is highly vulnerable to severe rust and localised pitting when exposed to heavy exterior moisture, coastal salt mist, marine environments, or harsh industrial chemicals (where Grade 316 or 304 is mandatory).
**Q: How does the addition of Nitrogen affect the mechanical properties of Grade 202?**
**A:** Grade 202 is intentionally infused with up to 0.25% nitrogen. Nitrogen acts as a highly effective structural interstitial hardener within the iron matrix, which significantly boosts the overall tensile strength and elevates the surface scratch resistance of the pipe against minor abrasions, dents, and high-traffic wear.
**Q: What regulatory standard governs these mechanical and decorative tubes?**
**A:** Grade 202 pipes are engineered to comply strictly with the **ASTM A554** specification (corresponding to European **EN X2CrMnNiN17-7-5** and German **DIN 1.4373** standards). This specification sets rigorous quality criteria for welded stainless steel mechanical tubing where close dimensional tolerances, straightness uniformity, and surface finish purity are of critical importance.
**Q: What surface finishes are available for Grade 202 architectural fabrications?**
**A:** Grade 202 adapts exceptionally well to mechanical polishing treatments:
* **Mirror Polish (Grit 600+):** Creates a highly reflective, chrome-like gloss widely chosen for high-end luxury retail trim and hospitality fixtures.
* **Brushed / Satin Finish (Grit 240/320):** Offers smooth, unidirectional matte lines that excel at concealing smudges and fingerprints in high-traffic commercial spaces.
* **Mill Finish (Unpolished):** A raw matte grey surface reserved for hidden structural frameworks or sub-assemblies.
**Q: Why does Grade 202 offer superior cost optimization for large commercial developments?**
**A:** Because manganese and nitrogen are significantly more cost-stable raw materials than volatile global nickel, the production cost of Grade 202 is dramatically lower than high-nickel alternatives. Sourcing welded 202 profiles (available in round, square, and rectangular geometries) allows project managers to retain large financial savings in high-volume real estate developments without losing structural framework stiffness.
**Q: What vendor compliance thresholds apply to major enterprise procurement?**
**A:** For major structural developments and institutional projects requiring full material traceability, procurement guidelines restrict vendor partnerships to established metallurgy specialists. Compliant suppliers must demonstrate an annual corporate turnover exceeding **₹5 Cr** paired with a continuous GST registration history of at least **3 years**. Utilising regional distribution lines centred in Gurugram ensures rapid material transport to local infrastructure zones and neighbouring commercial hubs.
For dry, indoor applications — furniture framing, interior railings, decorative trim — SS 202 offers strength, hardness, and appearance close to SS 304 at a lower material cost, since manganese and nitrogen substitute for part of the nickel content. It is not a substitute for SS 304 outdoors or in humid environments, where the lower nickel content gives it noticeably less corrosion resistance.
No. SS 202's lower nickel content compared to SS 304 gives it meaningfully less corrosion resistance, and it is not recommended for outdoor, high-moisture, or marine/coastal environments. For those conditions, SS 304 or SS 316 pipe is the appropriate grade.
Both are chromium-manganese-nickel grades in the same family, but SS 201 has a slightly lower nickel content and higher cold-workability than SS 202, which makes it a preferred option for structural sections that need heavy cold-forming.
SS 202 is an austenitic stainless steel, and austenitic grades are generally non-magnetic or only weakly magnetic in their annealed state, though cold working can introduce some magnetism at the surface.
Siddhgiri Overseas supplies SS 202 pipe in mill (unpolished), brushed/satin (grit 240/320), and mirror-polished (grit 600+) finishes, across round, square, and rectangular profiles.
Round pipe is available from 9.5mm to 114.3mm OD, square pipe from 12.7mm to 100mm face size, and rectangular pipe from 10x20mm to 50x100mm, with wall thickness from 0.5mm to 3.0mm across all profiles.
SS 202 corresponds to DIN 1.4373, EN X2CrMnNiN17-7-5, and ASTM A554 Grade MT202, the welded mechanical tubing specification covering architectural, structural, and ornamental use.
